SDMT / SDMW – INNOT insert

SDMT / SDMW

Insert for high-feed cutters: light cuts (up to 2.9 mm) with feeds up to 1.5 mm/tooth.

ISO P

ISO M

ISO K

ISO H

High feed

Roughing

★ IT5120 · IT5220 · IT5130

Request a quote

Technical data sheet PDFCutting data, sizes and grades

Want to try it first? Request a free tester

Fits on
High-feed cutters

Prices reserved for companiesLog in to your customer area to see your prices and request new ones in one click.
Sign in
Need technical advice? Talk to INNOT

(+39) 375 786 1361 Call · WhatsApp

INNOT grades

CVD, PVD and cermet for ISO P, M, K, S, H

Standard ISO designation

Compatible with the cutters you already use

Technical support

We help you choose geometry and coating

Shipping in 24/48 h

For stock orders throughout Italy

Categories: ,

Description

Specifications

Code IC S D1 RE APMX
SDMT1205ZTN-FM 12.7 5.56 4.6 3 2.3
SDMT1505ZTN-FM 15.875 5.56 5.5 0.8 2.9
SDMW1205ZTN 12.7 5.56 4.6 3 2.3
SDMW1505ZTN 15.875 5.56 5.5 0.8 2.9

Dimensions in mm. IC = inscribed circle, S = thickness, D1 = hole, BS = wiper flat, RE = corner radius, AN = clearance angle, APMX = maximum depth of cut.

Technical data

Operation Milling – High feed
Shape Square
ISO material P (steels), M (stainless steels), K (cast irons), H (hardened steels)
Features High feed: small axial depth and very high feed per tooth. Ideal for roughing moulds and pockets.
Compatible cutters Indexable cutters with SDMT seat: send us your cutter code and we will check compatibility.

Available INNOT grades

Grade ISO Coating Composition Application
IT5120 ★ P · M · K PVD TiAlN + CrAlN + TiSiN Universal grade for steels, stainless steels and cast irons, also ideal on materials of 35–50 HRC. Excellent wear resistance and toughness, high hot hardness.
IT5220 ★ P · M · K PVD AlTiN + TiSiN Universal grade for steels, stainless steels and cast irons up to 40–50 HRC. Double-layer coating: strength, toughness and protection against edge chipping.
IT5130 ★ P · M PVD AlTiN High-efficiency milling of steels and stainless steels below 30 HRC. Specially formulated substrate that reduces the risk of chipping, with a latest-generation nano coating.
IT6130 P · K CVD TiN + MT-TiCN + Al₂O₃ Semi-finishing and roughing of steels and cast irons. High-strength composite coating that balances wear and toughness; post-coating treatment increases insert toughness.
IT5110 P · H PVD TiAlN + CrAlN + TiSiN Milling of hardened steels 45–55 HRC. Nano-composite coating on an ultra-fine grain substrate: smooth surface, low friction, high nano-hardness and excellent oxidation resistance.
IT5210 P · H PVD AlTiN + TiSiN Milling of hardened steels 50–65 HRC. Coating with high thermal stability and oxidation resistance: withstands the most severe cutting temperatures.
IT530 P · M PVD AlTiN / AlCrN Specific for mild steel and stainless steel. Nano-multilayer coating and high-toughness substrate: higher speeds and feeds with lower risk of breakage.

★ Recommended grade. Other grades are available on request.

Cutting data and tips for use

Guide values on mild steel (≤180 HB) with IT5120/IT5220: Vc 200 m/min (120–220), ap 0.3–1.5 mm, fz 0.6–1.2 mm/tooth (cutter Ø20–25). On alloy steels reduce Vc to about 120 m/min and fz to 0.3–0.7 mm/tooth.

Printable cutting data tableAll the data on this page in an INNOT PDF to keep in the shop.Download PDF