Punta integrale in metallo duro 30×D INNOT
30×D solid carbide drill – INNOT technical drawing

30×D solid carbide drill

Drill for extra-deep holes up to 30 times the diameter, as an alternative to gun drilling on machining centres and lathes.

ISO P

ISO M

ISO K

ISO N

ISO S

ISO H

30×D

Ø 3–10 mm

135° point

Request a quote

Technical data sheet PDFCutting data, sizes and grades

Want to try it first? Request a free tester

Prices reserved for companiesLog in to your customer area to see your prices and request new ones in one click.
Sign in
Need technical advice? Talk to INNOT

(+39) 375 786 1361 Call · WhatsApp

Also custom made

Sizes, steps and geometries to drawing

Carbide and coatings

Rod and coating chosen for your material

Technical support

We help you choose geometry and coating

Shipping in 24/48 h

For stock orders throughout Italy

Categories: ,

Description

Technical drawing

30×D solid carbide drillExtra-deep drillingINNOTinternal coolant135°point angleLc cutting lengthLs shankL overall lengthØ DØ d h630×DØ 3–10 mm135° pointtol. h7internal coolant

Reference dimensions

Printable cutting data tableAll the data on this page in an INNOT PDF to keep in the shop.Download PDF
Drill Ø D Ø d shank L overall Lc cutting length Ls shank
Ø 3 6 140 100 36
Ø 4 6 176 136 36
Ø 5 6 208 168 36
Ø 6 6 240 200 36
Ø 8 8 305 265 36
Ø 10 10 372 328 40

Dimensions in mm. All intermediate diameters are available, also to the hundredth (e.g. Ø6.8 for M8 or Ø10.2 for M12): shank and lengths follow the diameter range.

Features

Drilling depth up to 30×D (30 times the diameter)
Diameters Ø 3 – 10 mm, in 0.01 mm steps
Point angle 135° self-centring, double margin
Ø D tolerance h7
Shank Cylindrical h6 (DIN 6535 HA); with Weldon flat on request
Coolant Internal, two helical channels
ISO materials P steels, M stainless steels, K cast irons, N aluminium, S superalloys and titanium, H hardened: rod and coating are chosen for the material
Construction Standard (deep-hole series) or custom made: lengths, steps, chamfers and angles to drawing

Tips for use

  • Drill a pilot hole 1.5–2×D deep with a short drill of the same diameter.
  • Enter the pilot hole at low speed and without coolant, then start the coolant and the working speed.
  • Recommended coolant pressure: at least 20 bar (better 40 bar or more beyond 20×D).

Coatings

All coatings are available on this tool, also in custom versions:

TiNTiCNTiAlNAlTiNAlCrNTiSiNAlTiSiNAlCrSiNCrNZrNTiB2DLCta-CCVD diamondUncoated

Compare coatings and carbide grades →

Need a different drill?

Diameter, length, step, angle, coolant, carbide rod and coating: configure the drill and receive the quote within 30 minutes.

Configure your drill