UN 60° threading inserts (UNC, UNF) – INNOT insert
UN 60° threading inserts (UNC, UNF) – INNOT profile

UN 60° threading inserts (UNC, UNF)

Full-profile inserts for UN 60° unified threads (UNC, UNF, UNEF), required in aerospace and hydraulics.

ISO P

ISO M

ISO S

Threading

5 – 28 threads per inch

★ IT5225

Request a quote

Technical data sheet PDFCutting data, sizes and grades

Want to try it first? Request a free tester

Fits on
Threading toolholders

Prices reserved for companiesLog in to your customer area to see your prices and request new ones in one click.
Sign in
Need technical advice? Talk to INNOT

(+39) 375 786 1361 Call · WhatsApp

INNOT grades

CVD, PVD and cermet for ISO P, M, K, S

Standard ISO designation

Compatible with the insert holders you use

Technical support

We help you choose grade and chipbreaker

Shipping in 24/48 h

For stock orders throughout Italy

Categories: , ,

Description

Profile

UN 60° threading inserts (UNC, UNF)American unified threadINNOTpart (external thread)INNOT insertP (threads per inch)60°axis60°5 – 28 threads per inchexternal and internalright- and left-hand

Range

Profile 60°
Pitch range 5 – 28 threads per inch
Type External (E) and internal (I), right-hand (R) and left-hand (L)
Insert size Inscribed circle 6.35 (11), 9.525 (16) and 12.70 mm (22); 3.97 and 4.76 mm for small internal bores
Construction Sintered with chipbreaker, or precision ground (P) for tight tolerances and finish
Typical application Aerospace, hydraulics and components for the American market.

Available INNOT grades

Grade ISO Coating Composition Application
IT5225 ★ P · M · S PVD Multilayer PVD First-choice grade for threading: steels, stainless steels and superalloys, excellent resistance to profile wear.
IT5125 P · M · S PVD Multilayer PVD Tough grade for threading in unstable conditions and interrupted cuts on steels, stainless steels and superalloys.

★ Recommended grade. On request also CVD grades for steels and cast irons, uncoated carbide for aluminium and cermet for finishing.

Tips for use

  • Decreasing depth of cut: lighter passes as you approach the thread root.
  • Flank infeed (modified infeed at 3–5° on the flank) for better chip control and longer insert life.
  • Choose the shim according to the thread helix angle: flanks that do not rub and a correct profile.

Which insert for your thread?

Tell us the thread (e.g. M20×2.5 external or 1/2″ NPT internal), material and toolholder: we tell you insert and grade with the quote.

Request a quote

Printable cutting data tableAll the data on this page in an INNOT PDF to keep in the shop.Download PDF