AOKT-VM: 90° shoulder milling inserts for all materials, semi-finishing

AOKT-VM

Insert for 90° square shoulder milling with VM chipbreaker, from the small AOKT06 to the robust AOKT16.

ISO P

ISO M

ISO K

ISO S

ISO H

90° square shoulder

Semi-finishing

★ IT6130 · IT5120 · IT5220 · IT5130

Prices reserved for companiesLog in to your customer area to see your prices and request new ones in one click.

Need technical advice? Talk to INNOT

(+39) 375 786 1361 Call · WhatsApp

INNOT grades

CVD, PVD and cermet for ISO P, M, K, S, H

Standard ISO designation

Compatible with the cutters you already use

Technical support

We help you choose geometry and coating

Shipping in 24/48 h

For stock orders throughout Italy

Description

Specifications

Code	L	W1	S	D1	RE	APMX
AOKT060202PEER-VM	7.61	4.2	2.38	2.1	0.2	4.5
AOKT060204PEER-VM	7.61	4.2	2.38	2.1	0.4	4.5
AOKT060208PEER-VM	7.61	4.2	2.38	2.1	0.8	4.5
AOKT113504PEER-VM	11.75	6.42	3.5	2.8	0.4	9.5
AOKT113508PEER-VM	11.75	6.42	3.5	2.8	0.8	9.5
AOKT113512PEER-VM	11.75	6.42	3.5	2.8	1.2	9.5
AOKT113516PEER-VM	11.75	6.42	3.5	2.8	1.6	9.5
AOKT113520PEER-VM	11.75	6.42	3.5	2.8	2	9.5
AOKT113532PEER-VM	11.75	6.42	3.5	2.8	3.2	9.5
AOKT160408PEER-VM	17.65	9.64	4.76	4.4	0.8	14.5
AOKT160412PEER-VM	17.65	9.64	4.76	4.4	1.2	14.5
AOKT160416PEER-VM	17.65	9.64	4.76	4.4	1.6	14.5

Dimensions in mm. IC = inscribed circle, S = thickness, D1 = hole, BS = wiper flat, RE = corner radius, AN = clearance angle, APMX = maximum depth of cut.

Technical data

Operation	Milling – 90° square shoulder
Shape	Rectangular
ISO material	P (steels), M (stainless steels), K (cast irons), S (superalloys and titanium), H (hardened steels)
Features	Positive, sharp cutting edge for accurate 90° shoulders. Wide choice of corner radii (from 0.2 to 3.2 mm).
Compatible cutters	Indexable cutters with AOKT-VM seat: send us your cutter code and we will check compatibility.

Available INNOT grades

Grade	ISO	Coating	Composition	Application
IT6130 ★	P · K	CVD	TiN + MT-TiCN + Al₂O₃	Semi-finishing and roughing of steels and cast irons. High-strength composite coating that balances wear and toughness; post-coating treatment increases insert toughness.
IT5120 ★	P · M · K	PVD	TiAlN + CrAlN + TiSiN	Universal grade for steels, stainless steels and cast irons, also ideal on materials of 35–50 HRC. Excellent wear resistance and toughness, high hot hardness.
IT5220 ★	P · M · K	PVD	AlTiN + TiSiN	Universal grade for steels, stainless steels and cast irons up to 40–50 HRC. Double-layer coating: strength, toughness and protection against edge chipping.
IT5130 ★	P · M	PVD	AlTiN	High-efficiency milling of steels and stainless steels below 30 HRC. Specially formulated substrate that reduces the risk of chipping, with a latest-generation nano coating.
IT5110	P · H	PVD	TiAlN + CrAlN + TiSiN	Milling of hardened steels 45–55 HRC. Nano-composite coating on an ultra-fine grain substrate: smooth surface, low friction, high nano-hardness and excellent oxidation resistance.
IT5210	P · H	PVD	AlTiN + TiSiN	Milling of hardened steels 50–65 HRC. Coating with high thermal stability and oxidation resistance: withstands the most severe cutting temperatures.
IT530	P · M	PVD	AlTiN / AlCrN	Specific for mild steel and stainless steel. Nano-multilayer coating and high-toughness substrate: higher speeds and feeds with lower risk of breakage.
IT7240	M · S	PVD	AlCrN	Milling of difficult materials: stainless steels, superalloys and titanium. High hot hardness, high toughness and resistance to fatigue fracture.
ITC10	P	Cermet	Uncoated	New-generation, very stable cermet: ideal for finishing low-carbon steels and wherever high surface quality is needed. Hard, compact surface, excellent chemical stability, wear and chipping resistance.

★ Recommended grade. Other grades are available on request.

Cutting data

Cutting data depend on cutter, machine and material: we send them to you with the quote, calculated for your part.

Printable cutting data tableAll the data on this page in an INNOT PDF to keep in the shop.Download PDF